RoofStep

All of the RoofGuard products are a cost-effective fall prevention solution.

All of our rooftop guardrail systems are designed in order to meet or exceed all North American Safety Standards.

With the addition of one of our rooftop fall prevention devices, you will be able to reduce PPE and training requirements of your staff and contractors.

All of our rooftop guardrail systems are safe and reliable fall prevention solutions.

Designed in order to be easily installed, many of our rooftop fall prevention systems can be installed with a single tool.

These fall prevention devices will help protect your employees from injury or death.

With the addition of a rooftop guardrail system, you will be able to reduce the potential for costly fines.

Every single one of the individual components used within these rooftop guardrail systems weighs under 40lbs.

RoofStep Rooftop Fall Protection

RoofStep is a unique and innovative rooftop guardrail system which enables you to safely move over rooftop elevation changes including parapet walls. These fall prevention systems come in several different styles of kits and are designed to have the engineered ladders on the face and back of the parapet walls and a platform over the parapet area in order to help protect the sensitive roof membrane or coping material from damage.

Already installed on numerous rooftops, this parapet guardrail system addresses a desperate need within the fall prevention industry. These rooftop fall prevention kits are a counterweighted fall prevention system, which provides safe and reliable access over parapet walls and other elevation changes. This fall safety system utilizes our RoofGuard baseplates in order to ensure optimum weight is allotted to all of the engineered approved points, all the while without requiring any drilling into the rooftop, meaning you will not have any resealing worries.

In order to ensure that these fall safety systems will be able to properly protect and service your rooftop no matter the parapet or obstacles that may be present on them, we have designed two distinct lines of RoofStep.

RoofStep Ladder Series:		RoofStep Crossover Series:
The ladder series is designed specifically to allow workers to move from one level of a roof to another.		The crossover series in comparison is designed to allow for the safe movement of workers on your roof. The rooftop crossover platform will enable your workers to be able to safely move up and over obstructions on similar roof levels, and have a 45-degree bracing on both sides of the system to allow for stability.

RoofStep has been designed in order to meet or exceed all major North American safety standards/regulations including Ontario MOL, ANSI, OSHA , OHSA and WorkSafeBC.

RoofStep Guardrail Features and Benefits:


Prevent people from falling from rooftops when trying to move over rooftop obstructions such as parapet walls.		When properly installed this rooftop guardrail system is often not visible from the ground.		Designed in order to be a permanent solution this guardrail system is also fully modular, and can be taken down, moved and rebuilt as needed.		Ensure that both your employees and contractors are able to safely move over parapet walls and other obstacles that may be located on your rooftop with this fall prevention device.


These parapet wall guardrail systems are designed in order to be able to quickly be assembled.		All of our rooftop guardrail systems meets or exceeds all major North American governing bodies fall protection requirements.		These rooftop guardrail systems can be utilized in order to optimize your rooftop maintenance process and ensure your contractors' safety.		All of these rooftop guardrail systems are able to be easily installed and use a single tool for assembly.

RoofStep Guardrail Protection Specifications:

Corrosion resistant aluminum tubing
1.5” Schedule 40 handrail tube
Aluminum or Galvanized fittings to resist corrosion
Minimal tools required for assembly
Custom colours available to match existing structure
Self-weighted bases are portable and allow simple, non-penetrating installation to the rooftop.
This system is designed in order to meet or exceed all major governing bodies fall protection requirements including ANSI, OSHA, OHSA & WorkSafeBC.

Available RoofStep Fall Prevention Kits:

These rooftop safety systems come pre-engineered in two crates; most of the parts are pre-assembled with easy to follow instructions and a singular tool for installation. This free-standing, portable, modular system is constructed with corrosion resistant lightweight aluminum tubing and utilizes counter weighted baseplates. With no rooftop penetration required your roof will remain intact, so you will not have to worry about any unexpected leaks occurring from using this fall prevention system.

RoofStep 5-5 XS		This RoofStep System goes up 5 feet and down 5 feet and has a diagonal bracing on the upper and lower sides for stability and includes a 36” long platform which is connected between the top two rungs.
RoofStep 5-4 XS		This RoofStep system allows you to safely move over elevation changes by allowing to safely move up 5 feet and down 4 feet. It has a diagonal bracing upper and lower bar for stability and includes a 36” long platform that is connected between the top two rungs.
RoofStep 5-3 LD		Safely move over parapet walls and other changes in elevation with this RoofStep system. This fall prevention system allows you to move up 5 feet and down 3 feet and has 6-foot guide rails on the upper levels to prevent falls to the lower levels from occurring.
RoofStep 5-2 LD		Safely moving across your roof has never been easier with this RoofStep system, which enables you to maneuver across rooftop elevation changes. This rooftop guardrail system allows you to move up 5 feet and down 2 feet and has a 6 foot guide rail on the upper levels to help prevent falls from occurring to the lower levels.
RoofStep 5-1 LD		Step safely across your rooftop with this RoofStep system. This fall prevention system will enable you to move up 5 feet and down 1 foot and has 6 feet of the guide rail on the upper levels in order to prevent falls from occurring.
RoofStep 4-4 XS		Safely move across changes in elevation with this RoofStep system. This RoofStep system is designed to allow you to move 4 feet up and 4 feet down and has diagonal bracing on the upper and lower sides for stability. This guardrail system also comes with a 36” long platform that is connected between the two top rungs.
RoofStep 4-3 LD		Use this RoofStep system to safely move over not only parapets, but also any other changes in elevation that you may be presented with. This RoofStep system is designed to allow you to move up 4 feet and down 3 feet on the roof with 6-foot guide rails on the upper levels to prevent falls from occurring to the lower levels.
RoofStep 4-2 LD		Move over rooftop obstructions and other changes in elevation with this RoofStep system. Designed to allow you to move 4 feet up and down 2 feet, this fall prevention system also comes with 6-foot guide rails on the upper levels in order to prevent falls from occurring to the lower levels.
RoofStep 4-1 LD		Allow your employees to move safely across rooftop elevation changes with this RoofStep system. Designed to allow the movement of 4 feet up and 1 foot down this guardrail system with its 6-foot guide rails on the upper levels will help you to keep your employees safe.
RoofStep 3-3 XS		Safe movement across rooftop elevation changes is possible with this RoofStep system. This rooftop guardrail system will allow you to move 3 feet up and 3 feet down, and has diagonal bracing on the upper and lower sides for stability, and includes a 36” long platform.
RoofStep 3-2 LD		Ensure you put safety first with this RoofStep system which is designed to allow you to safely move over elevation changes on your rooftop. This guardrail system will allow you to move 3 feet up and 2 feet down and has 5-foot guide rails on the upper levels to prevent falls from occurring on the lower levels.
RoofStep 3-1 LD		This RoofStep system is designed to allow you to safely move over obstacles that may be present on your rooftop such as parapet walls. This particular rooftop fall prevention device is designed to allow you to move 3 feet up and over the obstacles and one foot down, back onto the rooftop and has 6-foot guide rails on the upper levels which will help to prevent falls to the lower levels.
Custom RoofStep		Allow your employees the ability to cross over any obstacle on your rooftop. Our custom designed RoofStep systems are the perfect solution to avoid slips, trips and falls. Learn More Here

Reasons Why You Need RoofStep:

RoofStep rooftop guardrail systems help to ensure that both your employees and contractors are able to safely move over any rooftop obstructions that are located on your rooftop while not damaging the sensitive roof membrane. Some examples of where you can use a RoofStep system include when you need to move over elevation changes on the rooftop such as parapet walls or when you need a safe way to move over a rooftop obstruction such as pipes. If you have any type of obstruction that is located on your rooftop RoofStep your answer to how you can safely move over it.

Why our Fall Prevention Systems are Right for You: