RoofGuard X-Press Rails

RoofGuard X-Press Rooftop Guardrail

fall safety

RoofGuard X-Press is a unique, easy to install rooftop guardrail system. This rooftop fall protection system is designed with pre-fabricated rail sections which can be installed and dismantled quickly for temporary applications, without sacrificing quality, durability and most importantly safety.  

This unique rooftop guardrail system gives you the ability to design your own rooftop guardrail solution, allowing you to determine how much linear coverage you wish to cover, from 8 feet to over 100 feet and longer!

RoofGuard X-Press comes in two distinct rail lengths, the 8-foot rail length is powder coated in high-visibility safety yellow and the 6-foot rail sections are powder coated in grey. The reason these colours where chosen is to allow for simplistic assembly. The 8-foot lengths are designed to go on the roof’s leading edge and the 6-foot guardrail sections are for the returns/ ballast. The yellow guardrail also serves as a warning sign for workers who get too close to the roof edge, allowing them to always be aware of where the danger is.

Just like with our all of our RoofGuard products, RoofGuard X-Press uses a counterweight system, which involves no cutting into the existing rooftop surface. The railing thus has no direct or permanent attachment to your roof, meaning no holes, which means there is no re-sealing which meaning you will have no leaks!

RoofGuard has been designed to meet or exceed all major North American safety standards/regulations including Ontario MOL requirements, ANSIOSHAOHSA & WorkSafeBC.

RoofGuard X-Press Features and Benefits:

 Questionnaire Checklist Not Visible Designed to Fit Any Skylight System Regulations
Like all of our rooftop guardrail systems, RoofGuard X-Press is free standing and is designed to be aesthetically pleasing. Designed with safety yellow leading edge guardrail, these rooftop guardrail systems also act as a secondary warning sign of where the leading edge is located.

 

These rooftop guardrail systems can be set up to fit around almost any obstruction that may be located on the rooftop. All of our rooftop guardrail systems meet or exceed all major North American governing bodies fall protection requirements.
 Able to be Quickly Assembled Permanent Skylight Guardrail Solution   Questionnaire Checklist
Single Tool for Assembly
These rooftop fall prevention solutions are designed in order to be able to quickly and easily be assembled. This innovative rooftop guardrail system is designed in order to be lightweight, but durable and is a portable/movable system, making it perfect for both temporary and permanent applications. This rooftop guardrail system gives you the opportunity to design your own rooftop guardrail layout, allowing you to have the flexibility and freedom the work around any obstructions located on your rooftop. All of our guardrail systems are able to be installed easily and use a single tool for assembly.

RoofGuard X-Press Guardrail Specifications:

RoofGuard X-Press Rails
  • Durable Steel Construction
  • 1.9" OD Handrail Pipe
  • Minimal tools required for assembly
  • Custom colours available to match existing structure
  • Extra heights available for moderately elevated work near an edge.
  • Self-weighted bases are portable and allow simple, non-penetrating installation to the rooftop.
  • Fixed base sockets are also available for bolt-on applications
  • Rail Lengths are 6' and 8'

Reasons Why You Need RoofGuard X-Press: 

With its unique lightweight design, RoofGuard X-Press Rails are perfect for a variety of applications from permanent to temporary. This system also allows for you to be able to decide how much coverage you require, and ensures that you only have to pay for the guardrail that you need; allowing for you to ensure the safety of your employees and contractors while also ensuring you only have to pay for the guardrail that you require.

RoofGuard X-Press Ordering Tips:

It is important to remember that in order to properly be able to build your system you first need to purchase the required number of rail pieces in addition to the required accessories that are needed in order to properly be able to assemble this system. Required accessories include baseplates and rubber pads. In addition the required accessories you also need to purchase the correct quantities of yellow 8-foot rail, grey 6-foot rail. So, before you place your order, ensure you are aware of the amount of linear coverage you wish to cover how much of each item you require.

Below is an example of how you can determine the appropriate number of each part you would need to order for 48 linear feet of guardrail coverage.

48 ft rooftop guardrail  

  • 6x - 8 Foot Yellow X-Press Rail
    • For the Leading Edge
  • 3x - 6 Foot Grey X-Press Rail
    • For the Tie-Backs/Returns with one for the Intermediate Return
  • 20 RoofGuard Baseplates
    • 2 Per Corner
  • 10 Rubber Pads
    • One Per Stack of Baseplates

Why our Fall Prevention Systems are Right for You:

Cost Effective Regulations Reduces Training Costs Safe and Reliable
All of the RoofGuard products are a cost-effective fall prevention solution. All of our rooftop guardrail systems are designed in order to meet or exceed all North American Safety Standards. With the addition of one of our rooftop fall prevention devices, you will be able to reduce PPE and training requirements of your staff and contractors. All of our rooftop guardrail systems are safe and reliable fall prevention solutions.
 Single Tool for Assembly Prevent Falls Reduce the potential for fines Light Weight Components
Designed in order to be easily installed, many of our rooftop fall prevention systems can be installed with a single tool. These fall prevention devices will help protect your employees from injury or death. With the addition of a rooftop guardrail system, you will be able to reduce the potential for costly fines. Every single one of the individual components used within these rooftop guardrail systems weighs under 40lbs.

Additional Rooftop Safety Resources 

Latest News

10 Common Rooftop Safety Hazards > 

Workers Can be Seriously Injured from Falls > 

Fall Prevention for Solar Panel Maintenance Workers >

How to Be Safe During Rooftop Maintenance >

Fall Protection Safety for Workers at Heights >