Request a Quote

RoofGuard Classic Standard Guardrail Kits (9′, 12', 18', 27')

img 9 Fall Prevention Guardrail Kit v2

9′ Fall Prevention Guardrail Kit

RoofGuard 12 foot standard kit | fall protection

12’ RoofGuard Rooftop Guardrail

rooftop guardrail standard 18 foot kit | RoofGuard

18’ RoofGuard Rooftop Guardrail

img 27 Fall Prevention Guardrail Kit v2

27’ RoofGuard Rooftop Guardrail

Designed to eliminate fall protection concerns, while maximizing space; our Free Standing Truck Netting Systems are ideal for facilities that have multiple use bays, or where customers do not want to connect directly to the flatbed.
This simplistic design combines safety with functionality, as it can be operated by a single user and provides a soft catch barrier between personnel and the ground. Our Truck Netting System has been engineered to open or close easily, with no additional setup required for the netting panel. Arms fold out from the fixed columns and butt up against the side of the flatbed. No direct connection. Categorized as a passive system, our Truck Netting solutions require no training to operate and eliminate the need for the use of harnesses, lifeline systems, or overhead cranes.
Get a Quote
9' standard guardrail kit | fall protection

9′ Fall Prevention Guardrail Kit

9 ft. of leading edge Fall Protection. It requires no rooftop penetration, and can be categorized as a passive Fall Protection solution. This particular system is ideal for providing reliable Fall Protection around HVAC units, vents, near access ladders, antennas, valves, solar panels, or simply near frequently travelled areas that require routine maintenance.
  • Part Number: RGC-KIT-09
  • Height: 42” From Ground to Top of Top-Rail
  • Dimensions: 9″ x 24″ x 18″
  • Diameter of Rail: 1.9” OD Aluminum Pipe
  • Unit Weight: 450 lbs
RoofGuard 12 foot standard kit | fall protection

12’ RoofGuard Rooftop Guardrail

12 ft. of leading edge Fall Protection. It requires no rooftop penetration and can be categorized as a passive Fall Protection solution. This particular system is ideal for providing reliable Fall Protection around HVAC units, Vents, near Access Ladders, Antennas, Valves, Solar Panels, or simply near frequently travelled areas that require routine maintenance. This rooftop guardrail system provides 12 ft of leading edge protection with variable fitting in centre to allow for straight or 90° set up, two 6’ returns (ballast) aluminum handrail tube, cast aluminum magnesium fittings, base plates, rubber pads, installation tool.
  • Part Number: RGC-KIT-12 R
  • Height: 42” From Ground to Top of Top-Rail
  • Dimensions: 9″ x 24″ x 18″
  • Diameter of Rail: 1.9” OD Aluminum Pipe
  • Unit Weight: 500 lbs
rooftop guardrail standard 18 foot kit | RoofGuard

18’ RoofGuard Rooftop Guardrail

Our most popular design offers 18 ft. of leading edge Fall Protection, with two 6 ft. sections for weighted ballast. The hinged, variable fitting in the centre of the 18 ft. section allows for complete versatility when installing the system. It can be straight, at 90 degrees, or anything in between, depending on your requirements. This rooftop guardrail system offers 18ft of leading edge protection with two 6ft sections for weighted ballast. The hinged, variable fitting in the centre of the 18ft section allows for complete versatility when setting the systems up. It can be straight, at 90 degrees, or anything in between, depending on the requirements. The best way to ensure the safety of your workers is to plan ahead and implement a fall prevention solution within the areas of your rooftop that require access. Custom configurations available depending on your unique application.
  • Part Number: RGC-KIT-18
  • Height: 42” From Ground to Top of Top-Rail
  • Dimensions: 9″ x 24″ x 18″
  • Diameter of Rail: 1.9” OD Aluminum Pipe
  • Unit Weight: 525 lbs
27' Guardrail Kit | Fall Protection

27’ RoofGuard Rooftop Guardrail

27 ft. of leading edge Fall Protection with two 6 ft. sections for weighted ballast. Two hinged fittings allow for complete versatility when installing the system. It can be straight, at 90 degrees, or anything in between, depending on your requirements. This passive fall protection kit offers 27ft of leading edge protection with two 6ft sections for weighted ballast. The hinged, variable fitting in the centre of the 27ft section allows for complete versatility when setting the system up. It can be straight, at 90 degrees, or anything in between, depending on your requirements. Our largest RoofGuard Rooftop Guardrail System and it is designed to allow for the maximum amount of both linear coverage and flexibility, ensuring that your employees/contractors are protected around a wide variety of different potentially dangerous situations on your rooftop.
  • Part number: RGC-KIT-27
  • Height: 42” From Ground to Top of Top-Raild GAC
  • Dimensions: 9″ x 24″ x 18″
  • Diameter of Rail: 1.9” OD Aluminum Pipe
  • Unit Weight: 600 lbs

Frequently Asked Questions

Employers must provide protection to prevent employees from falling. According to Canadian Centre for Occupational Health and Safety (CCOHS) laws, any surface 3 metres (10 feet) above another level requires fall protection. In most cases, fall protection is required when:

  • other means of fall protection are not available or possible, such as guardrails
  • working at a height of 3 metres or more (permanent and/or temporary work areas)
  • working at a height of less than 3 metres when the surface below could cause a greater injury than just the fall (e.g., machinery; risk of drowning in water or other liquid; open tanks, vats, or pits containing hazardous materials; materials that can shift)
  • a worker may fall through an opening in the work surface
  • it is determined that fall protection is necessary

For sure! Fall protection regulations can be tricky, so if you’re unsure whether a rooftop guardrail system is the right solution, we can help. Just click here to fill out the form with as much detail as possible and our team will get back to you as soon as possible for a complete consultation. You can also reach our team directly at: 

Phone: 1-800-977-2005

Email: info@liftsafegroup.com

RoofGuard Guardrail Systems have been tested to meet or exceed American (OSHA), Canadian (CCOHS) and Provincial (OHSA in Ontario, and each equivalent in other provinces) safety regulations. They have also been tested to meet or exceed the engineering standards created by CSA and ANSI.

Both active and passive fall protection are effective in protecting workers from falling. However, while active protection requires involvement from the worker, passive systems can keep people safe regardless of training level and awareness of a hazard.

Active fall protection are known as Personal Fall Arrest Systems (PFAS), such as body harnesses, lanyards, and anchor points. Passive fall protection, alternatively, are physical barriers or systems, such as guardrails and safety nets, that prevent workers from falling or catch them if they do fall.

Passive solutions are always preferred to active ones. They represent engineering controls that keep people safe regardless of training level and awareness of a hazard.

It’s pretty simple. Click here to request a quote and our team will get back to you as soon as possible. Don’t forget to fill out the form with as much detail as possible so we can provide a precise quote. You can also reach our team directly at: 

Phone: 1-800-977-2005

Email: info@liftsafegroup.com

Roofguard is incredibly simple to install and can be easily installed by an inexperienced worker with simple hand tools and our instructions. Each system has labels that contain a QR code linking to a series of videos showing exactly how to install it for maximum time savings. 

Each RoofGuard system comes with a stamped engineering drawing back by the in-house engineering team at Liftsafe Fall Protection.

While every system is different, at times the initial costs of guardrail can be slightly more compared to horizontal lifeline systems. However, you also need to consider the costs of certifying employees for working at heights (every three years), anchor point inspections (annually), lanyard and harness costs and inspections (annually), recordkeeping (ongoing), a rescue plan, and other related costs. When you take these into account, the overall cost of an installed guardrail system is much lower when compared to horizontal lifeline systems. 

There is also the amount of time and resources that must be devoted to making sure these are all adhered to. Whereas, a guardrail system can be set up once and you are instantly compliant.

Yes. RoofGuard Guardrail Systems are typically made of aluminum, which ensure durability in diverse weather conditions. They are designed to be protected from corrosion, rust and other environmental factors, and its components contribute to resistance to environmental wear and tear.

The RoofGuard Guardrail System is a modular, non-penetrating system designed to eliminate the potential hazard of falls over unprotected edges on a rooftop or elevated surface. It is counter weighted, which means it requires no welding, drilling, or bolting into the actual roof structure, and is designed to rest on top of it while still meeting lateral force requirements set out in the appropriate standards and laws. 

Yes. RoofGuard comes standard as an aluminum system that is grey but some clients prefer it to be painted safety yellow. This is done in-house with a powder coated paint that is weather resistant.

No. RoofGuard must not be used as an anchor. This is stated explicitly in the RoofGuard installation manual among other safety requirements.

Yes. This depends on how steep the slope is for standard systems (it must meet the standards and regulations for sloped roofs). However, custom systems are available for multiple applications including sloped roofs.

Request a Quote

Why our Fall Prevention Systems are Right for You

All of the RoofGuard products are a cost-effective fall prevention solution.

All of our rooftop guardrail systems are designed in order to meet or exceed all North American Safety Standards.

With the addition of one of our rooftop fall prevention devices, you will be able to reduce PPE and training requirements of your staff and contractors.

All of our rooftop guardrail systems are safe and reliable fall prevention solutions.

Designed in order to be easily installed, many of our rooftop fall prevention systems can be installed with a single tool.

These fall prevention devices will help protect your employees from injury or death.

With the addition of a rooftop guardrail system, you will be able to reduce the potential for costly fines.

Every single one of the individual components used within these rooftop guardrail systems weighs under 40lbs.

The Hierarchy of Fall Protection Solutions

Elimination of Hazards

  • Whenever possible, remove the fall hazard itself.
  • If there is no fall hazard, there’s no fall.

Passive Systems

  • Do not require the use of Personal Protective Equipment or active participation from the worker.
  • Include Guardrails or Netting Systems.
  • A preferred choice for its ease of use without the need for additional training and PPE.

Fall Restraint

  • Uses personal fall arrest equipment (harness, lanyard, a. anchor point) to stop the user from reaching the edge.
  • This type of ttying-offi p the user from falling in the first place.

Fall Arrest

  • When all other solutions are infeasible.
  • Fall arrest uses the same equipment as fall restraint but the fall protection equipment engages after the fall happens
  • When it engages, the equipment slows the workers descent, bringing them to a safe stop.

Become A Dealer

Offer a wide range of high-quality engineered fall protection solutions to your customers.

Contact Us
Industrial barrier netting

Industrial Barrier Netting

Engineered vertical barrier netting systems around stacked boxes and walkways to provide protection against falling materials and a security barrier against potential theft.

View
Rackguard Netting in warehouse

RackGuard Netting Systems

RackGuard netting is a cost-effective, engineered solution designed to make warehouses and industrial racking safer for employees and visitors by creating a “soft-catch” for products that fall from racking.

View

Related Products

About Liftsafe Fall Protection

Learn more about our team and what sets us apart as industry experts in fall protection, ground support and material handling industries.
Let’s Go

Netting Catalogue

Dive into the latest netting options our team has to offer. This catalogue will provide a complete overview of our products and services.
Let’s Go

Customer Service

Our team is committed to providing the highest level of customer service. If you didn’t find the information you were looking for, please contact us.
Let’s Go

Request a quote

We offer a huge selection of products and quick quotes for what you’re looking for.

Get a Quote

Have questions?

Give us a call. Our friendly customer service staff are on hand to help you.
Call (519) 896-2430
Request a Quote
Become a Dealer