Rooftop Guardrail 27′ Kit

This Fall Prevention Guardrail System provides 27 feet of leading-edge Fall Prevention, requires no rooftop penetration, and can be categorized as a passive Fall Prevention Solution. This is our largest rooftop guardrail kit, and it is designed in order to allow for the maximum amount of both linear coverage and flexibility, ensuring that your employees/contractors are protected around a wide variety of different potentially dangerous situations on your rooftop.

This passive fall prevention kit offers 27ft of leading edge protection with two 6ft sections for weighted ballast. The hinged, variable fitting in the centre of the 27ft section allows for complete versatility when setting the system up. It can be straight, at 90 degrees, or anything in between, depending on your requirements.

These systems come engineered in a single crate; most parts are pre-assembled with easy to follow instructions and a single tool for installation. This free-standing, portable, modular system is constructed with corrosion resistant lightweight aluminum tubing and utilizes counter weighted baseplates. With no rooftop penetration your roof will remain intact, so you will not have to worry about any unexpected leaks occurring from using this system.

RoofGuard has been designed to meet or exceed all major North American safety standards/regulations including Ontario MOL requirements, ANSIOSHAOHSA & WorkSafeBC.

Rooftop Guard Rail Features and Benefits: 

Permanent Skylight Guardrail Solution Prevent Falls Designed to Fit Any Skylight System Safe and Reliable
Don't let safety take a back seat, these rooftop guardrail systems can be used in a variety of situations on your rooftop to ensure the safety of your contractors and employees. Prevent employees and contractors from falling when working on your rooftop by providing a fall prevention guardrail system. These rooftop guardrail systems are designed in order to be used on most rooftops. These fall prevention systems create a protective boundary around the hazard without causing any damage to the roof or roof membrane.
Able to be Quickly Assembled No Rooftop Penetration Required Questionnaire Checklist Single Tool for Assembly
These rooftop guardrail systems are designed in order to be able to quickly and easily be assembled. These rooftop guardrail systems are designed to have a maintenance-free finish. These fall prevention guardrail systems can be utilized on a variety of applications including being used to offer full rooftop coverage. All of our guardrail systems are able to be installed easily and use a single tool for assembly.

Rooftop Guardrail Specifications:

Rooftop Guardrail Kit
  • Corrosion resistant aluminum tubing
  • 1.5” Schedule 40 handrail tube
  • Aluminum or Galvanized fittings to resist corrosion
  • Minimal tools required for assembly
  • These rooftop guardrail kits can be set up in order to fit around obstructions
  • Fittings can accommodate sloped roof sections up to 5% grade
  • Self-weighted bases are portable and allow simple, non-penetrating installation to the rooftop.


RoofGuard Classic 27' Kit Components:

  • Single tool supplied for assembly
  • Complete installation manual and layout drawings
  • 10 Counterweighted baseplates
  • 6 Rubber mats in order to protect the rooftop membrane
  • 6 Pre-Assembled vertical posts
  • 10 Horizontal Rails
  • Set Screws
  • Variable fittings between sections, allow for flexibility during installation
  • All parts and materials are supplied in a singular crate

Reasons Why RoofGuard Classic is the Solution for You: 

This is our largest RoofGuard Classic Kit and with the addition of this fall prevention system to your rooftop, you will be able to eliminate the need for active fall prevention equipment such as Safety Harnesses/ Lanyards, Roof Anchor Systems or Horizontal Lifelines. Meaning you will not have to worry about any fines for compliance violations from having inadequate or non-existent rooftop safety training or products.

 

Cost Effective Regulations Reduces Training Costs Safe and Reliable
All of the RoofGuard products are a cost-effective fall prevention solution. All of our rooftop guardrail systems are designed in order to meet or exceed all North American Safety Standards. With the addition of one of our rooftop fall prevention devices, you will be able to reduce PPE and training requirements of your staff and contractors.

 

All of our rooftop guardrail systems are safe and reliable fall prevention solutions.
 Single Tool for Assembly Prevent Falls Reduce the potential for fines Light Weight Components
Designed in order to be easily installed, many of our rooftop fall prevention systems can be installed with a single tool. These fall prevention devices will help protect your employees from injury or death. With the addition of a rooftop guardrail system, you will be able to reduce the potential for costly fines. Every single one of the individual components used within these rooftop guardrail systems weighs under 40lbs.

Why our Fall Prevention Systems are Right for You:

Additional Rooftop Safety Resources

What is the difference between a Passive and an Active Fall Protection System >

How our product complies/exceeds working at heights legislation/training requirements >

How we stack up against the competition. Literally >

Shipping and Storage made easy. How RoofGuard Kits reduce install time and save you money >

Camera Shipping and Storage User Manual Catalogue
View Our
Photo Gallery
Shipping and
Storage
Download User
Manual
View RoofGuard
Catalogue

Latest News

10 Common Rooftop Safety Hazards > 

Fall Prevention for Solar Panel Maintenance Workers >

How to Be Safe During Rooftop Maintenance >

Working at Heights - Safety and Training >

Are you working too close to the edge >

Fall Protection Safety for Workers at Heights >