Request a Quote
Become a Dealer

Free Standing Flatbed Truck Netting

TN PIVOT FREE 53FT SALES

Pivoting Free Standing Truck Netting System

Free Standing flatbed truck netting rendering

Classic Free Standing Truck Netting System

Designed to eliminate fall protection concerns, while maximizing space; our Free Standing Truck Netting Systems are ideal for facilities that have multiple use bays, or where customers do not want to connect directly to the flatbed.
This simplistic design combines safety with functionality, as it can be operated by a single user and provides a soft-catch barrier between personnel and the ground. Our Truck Netting System has been engineered to open or close easily, with no additional setup required for the netting panel. Arms fold out from the fixed columns and butt up against the side of the flatbed. No direct connection. Our truck netting solutions require no training to operate and eliminate the need for the use of harnesses, lifeline systems, or overhead cranes.

Why invest in truck netting?

Falls off of flatbed trucks during loading and unloading operations are on the rise due in part to irregular materials such as steel, pipe, timber, unbalanced loads, and a lack of knowledge regarding fall protection safety within the industry. Our systems are designed to eliminate the number of serious accidents whereby personnel is either fatally injured or suffer a significant injury from a fall. Helping you to ensure the safety of your employees.
Get a Quote
TN PIVOT FREE 53FT SALES

Pivoting Free Standing Truck Netting System

The Pivoting Free Standing Truck Netting System utilizes columns designed to mount directly to your facility’s floor and provides a “soft catch” for personnel who may fall during loading/unloading of materials. The system is built with a compression arm that can pivot to rest directly against your flatbed truck. This system has been engineered to open or close quickly and easily, with no additional setup required for the netting panel. The system is the perfect permanent safety solution to mitigate the risk and cost of serious workplace injuries that could be incurred if a worker falls from a truck.

Components

  • 3 columns (6-inch x 6-inch)
  • Pivoting arm
  • Compression bar (made up of three bars)
  • 3/8-inch galvanized GAC
  • Snap hooks for every 2 ft
  • 2 3/8-inch light duty thimble
  • 1 net panel
  • 4 3/8-inch wire rope clips
  • 1 TB (6-inch x half inch)
Free Standing flatbed truck netting rendering

Classic Free Standing Truck Netting System

Our Classic Free Standing Truck Netting System is designed to mount directly to your facility’s floor and provides a “soft catch” for personnel who may fall during loading or unloading of materials. The netting system is custom designed to quickly attach to the bed of the truck, creating a safe working environment. The netting is attached with wire rope and custom brackets that attach to the stake pockets of the flatbed trailer. Our team can design a system for almost any trucking bay, with custom size configurations to ensure we meet the safety needs of your equipment.

Components

  • 3 columns (6-inch x 6-inch)
  • 3/8-inch galvanized GAC
  • Snap hooks for every 2 ft
  • Stake pockets every 2 ft
  • 2 3/8-inch light duty thimble
  • 1 net panel
  • 4 3/8-inch wire rope clips
  • 1 TB (6-inch x half inch)

Frequently Asked Questions

Passive fall protection does NOT require any action by people. Examples include: Guardrails, Safety Nets, etc. Active fall protection requires training and direct connection to an engineered fall protection system or anchor point. Examples include: Body Harnesses and Lanyards, Anchor Points, etc.

OSHA 12.10 (1.1), every employer shall provide a fall-protection system to any person, other than an employee who is installing or removing a fall-protection system in accordance with the instructions referred to in subsection (5), who works: (a) from an unguarded structure or on a vehicle, at a height of more than 2.4 m above the nearest permanent safe level; (b) from a temporary structure at a height of more than 6 m above a permanent safe level.

ANSI A10.11 All nets supplied are manufactured and tested in accordance with Industry Standards, and all such netting has been tested to strict ANSI standards as laid out in ANSI A10.11. This includes the complete system with all hardware installed onto a racking system and tests made to simulate a real-case product fall.

Yes, all of our systems include a user manual, custom drawing, and detailed installation instructions. If needed, we offer installation services.

Untested and/or self-fabricated remedies are risky. You are responsible for any accidents relating to the failure of hardware and installation. Incorrect installation could result in a system that does not provide the protection you require.

Netting is used anytime a fall hazard may exist. It is used to protect workers when performing a job on or around a parked flatbed truck.

Get in touch with our sales reps, and they can provide you with a Quote Request Form that is easy to fill out. The form asks for information such as the width of your bays, the height of your rack frames, and the weight of the pallets you are looking to protect.

The amount of space available beside the “typical” trailer location when loading/tarping/etc.

The further away from the trailer you can position the posts, the lower the posts have to be.

Overhead cranes. Do they load from the side, the end or both? If from the side, how high can the posts be without interfering with the loading process?

Connection to the trailer – the standard system requires attachment directly to the trailer while the pivot system does not.

Forklift loading from the side – is this done at all? If so, the trailer safety nets will not work.

Request a Quote

Industrial barrier netting

Industrial Barrier Netting

Engineered vertical barrier netting systems around stacked boxes and walkways to provide protection against falling materials and a security barrier against potential theft.

View
Rackguard Netting in warehouse

RackGuard Netting Systems

RackGuard netting is a cost-effective, engineered solution designed to make warehouses and industrial racking safer for employees and visitors by creating a “soft-catch” for products that fall from racking.

View

Related Products

About Liftsafe Fall Protection

Learn more about our team and what sets us apart as industry experts in fall protection, ground support and material handling industries.
Let’s Go

Netting Catalogue

Dive into the latest netting options our team has to offer. This catalogue will provide a complete overview of our products and services.
Let’s Go

Customer Service

Our team is committed to providing the highest level of customer service. If you didn’t find the information you were looking for, please contact us.
Let’s Go

Request a quote

We offer a huge selection of products and quick quotes for what you’re looking for.

Get a Quote

Have questions?

Give us a call. Our friendly customer service staff are on hand to help you.
Call (519) 896-2430
Request a Quote
Become a Dealer